Let's hope this turns out to be nothing...

Oct 2 19:53:05 big64.local scsi: WARNING: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk@0,0 (sd6):
Oct 2 19:53:05 big64.local Error for Command: read(10) Error Level: Fatal
Oct 2 19:53:05 big64.local scsi: Requested Block: 64 Error Block: 64
Oct 2 19:53:05 big64.local scsi: Vendor: TSSTcorp Serial Number: 
Oct 2 19:53:05 big64.local scsi: Sense Key: Hardware_Error
Oct 2 19:53:05 big64.local scsi: ASC: 0x3e (timeout on LUN), ASCQ: 0x2, FRU: 0x0

There was a tremendous lightning strike, brief power outage, and then silence. I checked on the kids and house and then the servers. They were all off. I started them up again, and when booting the Sparc running the DB (which this blog uses) that icky error appeared.

Silver lining is that since the 300GB drives don't work in the other server, I've got two spares. Grey spot in that silver lining is I'm not sure I did the RAID completely accurate, and even if I did, I've never had cause to replace a drive. I'm sure I can identify which drive this is (I haven't gone down there, but I expect if it's still timing-out and failing that its drive light is blinking...the servers are good at that), but I'm not sure if I plug it in it'll just format itself and fill in automatically... Maybe weekend experiments coming soon!

Worst case I have to rebuild the server again! EEK!

Then I started shopping for 1500VA UPS...I need three...heh. Also, I need to turn on the big CPU server.